Material requirements planning method for controlling inventory of raw materials

Authors

  • Hendra Cipta Universitas Islam Negeri Sumatera Utara, Medan, Indonesia
  • Rima Aprilia Universitas Islam Negeri Sumatera Utara, Medan, Indonesia
  • Hari Kurniawan Universitas Islam Negeri Sumatera Utara, Medan, Indonesia

DOI:

https://doi.org/10.35335/cit.Vol15.2023.358.pp1-8

Keywords:

Brownies, Inventory Control, Material Requirment Planning, Production, Raw materials

Abstract

The existence of shortages and excesses of production raw materials often occurs in the NR Brownies company where this situation greatly influences the smooth production process, especially in the supply of raw materials which results in sub-optimal expenditure costs. The aim of this research is to find solution how to prevent companies from experiencing these problems on a regular basis which results in less than optimal spending costs. In overcoming this problem, the Material Requirement Planning method is applied, this method is expected to minimize expenditure costs so that the benefits obtained are more optimal. From the research results, the Material Requirement Planning Method for EOQ calculations produces the minimum costs for sugar and oil raw materials of 18.295.130 and 19.591.230 respectively, while the POQ calculation produces the minimum costs for raw materials 14.839.500 for flour, 15.450.000 for eggs, 1.356.650 for cocoa flour, and 2.504.387 for baking powder.

Downloads

Download data is not yet available.

References

H. D. Susanti, “Application of material requirement planning method in raw materials planning on sardine product in pt. Blambangan foodpackers indonesia,†Food Res., vol. 4, no. 6, pp. 2067–2072, 2020, doi: 10.26656/fr.2017.4(6).228.

F. Lefta, L. Gozali, and I. A. Marie, “Aggregate and disaggregate produetion planning, material requirement, and capacity requirement in Pt. XYZ,†2nd TICATE 2019 IOP Conf. Ser. Mater. Sci. Eng., vol. 852, no. 1, 2020, doi: 10.1088/1757-899X/852/1/012123.

H. indah Sari, S. Dur, and H. Cipta, “Forecasting Of Jansen ’ S Rice Inventory Control Using Monte Carlo And Markov Chain Techniques,†Iternational J. Basic Appl. Scrience, vol. 11, no. 2, pp. 76–85, 2022.

F. Rakhmawati, “Optimization of Material Requirement Planning Using A Linear Program,†vol. 2, no. 1, pp. 1–13, 2022.

S. Permana, M. Andriani, and D. Dewiyana, “Production Capacity Requirements Planning Using The Capacity Method Requirement Planning,†Int. J. Eng. Sci. Inf. Technol., vol. 1, no. 4, pp. 36–40, 2021, doi: 10.52088/ijesty.v1i4.165.

C. Furqon, M. A. Sultan, and R. J. Pramudita, “Analysis of Material Requirement Planning (MRP) Implementation on The Company,†Proc. ofthe 2nd Int. Conf. Econ. Educ. Entrep. (ICEEE 2017), no. February 2020, pp. 140–145, 2018, doi: 10.5220/0006882001400145.

A. F. Rhufyano, M. F. Robbani, and H. R. Arifin, “Optimizing Efficiency through Application of the Materials Requirement Planning and Demand Forecasting : A Case Study of a Small and Medium-Sized Enterprise in the Tea Beverage Industry,†pp. 1152–1162, 2022.

B. Werth, J. Karder, A. Beham, and K. Altendorfer, “Simulation-based Optimization of Material Requirements Planning Parameters,†Procedia Comput. Sci., vol. 217, no. 2022, pp. 1117–1126, 2023, doi: 10.1016/j.procs.2022.12.310.

N. Hasanati, E. Permatasari, N. Nurhasanah, and S. Hidayat, “Implementation of Material Requirement Planning (MRP) on Raw Material Order Planning System for Garment Industry,†IOP Conf. Ser. Mater. Sci. Eng., vol. 528, no. 1, 2019, doi: 10.1088/1757-899X/528/1/012064.

M. Malindzakova, P. Garaj, J. TrpÄevská, and D. Malindzak, “Setting MRP Parameters and Optimizing the Production Planning Process,†Processes, vol. 10, no. 4, 2022, doi: 10.3390/pr10040690.

S. H. Santosa, A. P. Hidayat, and R. Siskandar, “Raw material planning for tapioca flour production based on fuzzy logic approach: a case study,†J. Sist. dan Manaj. Ind., vol. 6, no. 1, pp. 67–76, 2022.

M. Thürer, N. O. Fernandes, and M. Stevenson, “Production planning and control in multi-stage assembly systems: an assessment of Kanban, MRP, OPT (DBR) and DDMRP by simulation,†Int. J. Prod. Res., vol. 60, no. 3, pp. 1036–1050, 2022, doi: 10.1080/00207543.2020.1849847.

S. Thevenin, Y. Adulyasak, and J. F. Cordeau, Material Requirements Planning Under Demand Uncertainty Using Stochastic Optimization, vol. 30, no. 2. 2021.

S. Purnamadewi, S. Purnamasari, and T. Sriwidadi, “Planning and Controlling Raw Material of Balado Seasoning Using Material Requirements Planning (MRP) Method,†in Proceedings of the 7th North American International Conference on Industrial Engineering and Operations Management, Orlando, Florida, USA, 2022, pp. 1627–1635.

D. Mukhlis, J. Indraefrialdi, and E. Rimawan, “Inventory Management using Demand Driven Material Requirement Planning for Analysis Food Industry,†Int. J. Innov. Sci. Res. Technol., vol. 4, no. 7, pp. 2456–2165, 2019.

R. P. Ahlam Azzamouri, Pierre Baptiste, Guillaume Dessevre, “Demand Driven Material Requirements Planning (DDMRP): A Systematic Review and Classification,†J. Ind. Eng. Manag., vol. 14, no. 3, pp. 439–456, 2021.

G. Ke, R. S. Chen, Y. C. Chen, S. Wang, and X. Zhang, “Using ant colony optimisation for improving the execution of material requirements planning for smart manufacturing,†Enterp. Inf. Syst., vol. 16, no. 2, pp. 379–401, 2022, doi: 10.1080/17517575.2019.1700552.

H. A. P. Y A Titilias, L Linawati, “Optimasi Perencanaan Produksi Kayu Lapis PT. XXX Menggunakan Metode Goal Programming,†J. MIPA, vol. 41, no. 1, pp. 13–19, 2018.

F. Nurprihatin, “Improving the Performance of Planning and Controlling Raw Material Inventory in Food Industry,†Int. J. Res. Ind. Eng., vol. 10, no. 4, pp. 332–345, 2021.

B. Mark and C. Peter, “Introduction to quantitative research,†S. Publ. Ed.), Sage Publ., vol. 1, 2001.

S. Al-najjar, “Materials Requirements Planning : Performance Evaluation of Lot-Sizing Techniques,†Acad. if Entrep. J., vol. 28, no. 2, pp. 1–15, 2022.

R. Jayaraman, C. Colapinto, D. Liuzzi, and D. La Torre, “Planning sustainable development through a scenario-based stochastic goal programming model,†Oper. Res., vol. 17, no. 3, pp. 789–805, 2017, doi: 10.1007/s12351-016-0239-8.

H. Zijm and A. Regattieri, “Manufacturing Planning and Control Systems BT,†in Operations, Logistics and Supply Chain Management, H. Zijm, M. Klumpp, A. Regattieri, and S. Heragu, Eds. Cham: Springer International Publishing, 2019, pp. 251–271.

I. Setiawan, Nurdiansyah, M. Tosin, V. Lusia, and M. Wahid, “Aggregate Planning Implementation for Planning and Controlling the Materials in the Beverage Packaging Industry,†Spektrum Ind., vol. 20, no. 1, pp. 95–104, 2022.

M. Díaz-Madroñero, J. Mula, M. Jiménez, and D. Peidro, “A rolling horizon approach for material requirement planning under fuzzy lead times,†Int. J. Prod. Res., vol. 55, no. 8, pp. 2197–2211, 2017, doi: 10.1080/00207543.2016.1223382.

W. Sutrisno and H. N. P. Airlangga, “Analysis of crude oil inventory using the material requirement planning method,†IOP Conf. Ser. Mater. Sci. Eng., vol. 722, no. 1, 2020, doi: 10.1088/1757-899X/722/1/012059.

S. Haryani and F. Aldini, “Analysis of the Application of Material Requirement Planning Method in Nature to Achieve the Production Targets of the Moraja Donggala Social Forestry Business Group,†Int. J. Heal. Econ. Soc. Sci., vol. 4, no. 4, pp. 243–251, 2022.

Downloads

Published

2023-03-30

How to Cite

Cipta, H., Aprilia, R. ., & Kurniawan, H. . (2023). Material requirements planning method for controlling inventory of raw materials. Jurnal Teknik Informatika C.I.T Medicom, 15(1), 1–8. https://doi.org/10.35335/cit.Vol15.2023.358.pp1-8